RF Scan Processor Board

The RF Scan Processor board receives input two videos and two RF input. The board is used for processing the RF input video input signals and transferring it to the other boards via cPCI bus. The board supports data transfer rate of more than 50 Mbps over the cPCI bus.

Read More

RF Scan Processor Board

The RF Scan Processor board receives input two videos and two RF input. The board is used for processing the RF input video input signals and transferring it to the other boards via cPCI bus. The board supports data transfer rate of more than 50 Mbps over the cPCI bus.

The RF scan processor board has an ADC section with RF front-end signal conditioning circuit which receives the signals. It also has two FPGAs which does all the logical and arithmetic operations of the system.

The board is used in RF signal acquisition and processing for Electronic Warfare application.

KEY FEATURES

  • Two RF input channels, with following features
    • Single ended, AC-coupled (50 ohms)
    • Signal bandwidth from 50 MHz to 1.5 GHz with signal power in range of –
      40dBm to 0dBm
    • Provision for two Band pass filter on each of the RF input channel
  • Two video input channels, with following features
    • Single ended, DC-coupled (50 ohms)
    • Signal bandwidth from 0Hz to 100MHz with signal level power in range
      of 0 to 2.5V
  • Add-on mezzanine card for RF signal conditioning circuit
  • Data transfer on the cPCI bus @ > 50 MBytes per second
  • Two optical serial links, each supporting 2.125 Gbps serial data rate